LED Strip Light, Common Types

LED Strip Light - a flexible, thin (0.2-0.25 mm) printed circuit board (dielectric substrate, onto which the conductive paths) defined it SMD type LEDs and resistors, assembled in modules with a minimum length of luminescence (MDS). LED tapes are widely used in lighting of architectural elements, interior of houses: in the kitchen, to illuminate the walls, ceilings, furniture, aquariums, decorative moldings, niches and so on. They are used and tuning vehicles: For the illumination of the instrument panel, interior, underbody, trunk, etc. Also tape handy LED to create different elements: advertising signs, figures and others.

There are many types of LED light strips. Consider the main ones:

- LED strip differ in the type of LEDs used therein. The most common types are LED SMD3528 and SMD5050. SMD marking means that the elements are attached to the PCB by surface mount LED numbers mean size (3.5 mm × 2.8 mm, 5 mm × 5 mm);

-The number of LEDs per meter tapes, and consequently, the luminescence brightness, power consumption. SMD3528 type belts are of two types: 60 pcs. or 120 pieces, and 5050 RGB LED strip type are of two types:30 pcs. and 60 pcs. Power consumption of these tapes will be 4,8-9,6 8,6-17,2 W and W per meter. Accordingly, the power LED strip will be 0.4-0.8 and 0.7-1.4 amperes per meter at a supply voltage of 12 volts.

-0The quality of the elements used tape LED are divided into professional and tape and economy class. The professional use of high quality components are serious selection. These products are used for a long time and meet all the specs. low quality Accessories have a much shorter service life, low cost, economical way to characterize the illumination - the result is a cost-effective LED ribbon. Price is a professional tape 5 and higher dollars per meter (60 diodes), and 10 dollars and above per square meter (120 diodes), economy class about half the price;

- The degree of protection against external influences, such as particulate matter, dust, moisture, etc. For example, the tape can see the model name designation IP20, IP33, IP65, etc., and it is marked degree of protection... The first digit indicates the level of protection against dust and solid objects, the second - from moisture. The higher the number, the higher the security level is. Exterior lighting is recommended to use a moisture-proof, waterproof LED light strips (e.g. fishtank bar), which have degree of protection IP65, IP67 and IP68. There are tapes that may be installed directly under the water - to illuminate swimming pools, fountains, quays, etc.;

- On Light color: white (warm, cold), yellow, red, blue and green light. SMD ribbons of different colors with the help of controllers allow to emit a wide variety of colors and shades. There are tapes on which a number of basic colors with LEDs mounted diodes white color of cold and warm glow, this combination allows you to play any shades, soft bedding colors. Management controllers are available with remote control;

- On a substrate color: black, white, and yellow. The color characteristics of the substrate on the tape are not affected.

http://www.bizbilla.com/